Audison APK 165 Kit | 300 W Peak Power | Kit 2 way 4 ohm | AP 1 + AP 6.5 + Crossover

• AP 1 tweeter with 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.
• AP 1 tweeter with an acoustic lens designed to compensate for and fine-tune the in-car frequency response anomalies in the 10kHz – 13kHz bandwidth caused by restrictive OEM grilles in critical OEM placements.
• APCX TW very compact tweeter passive crossover optimized for OEM Integration featuring an attenuation switch (0 dB, +2dB) to tune the in-car response according to different installation conditions.
• Passive crossovers are supplied with fast-on connectors that conform to OEM integration. The ends, different in each of the two poles, eliminate any possible connection errors and speed up the
  required installation time.
• AP 6.5 woofer with 32 mm pure copper voice coil, for high power handling and outstanding low-frequency control.
• AP 6.5 woofer with a water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel Scan Vibrometer.
• AP 6.5 woofer with reduced mounting depth, providing ease of installation in OEM placements.
• AP 6.5 woofer with TPU (thermoplastic polyurethane) edge, featuring the unique “triple wave” profile for maximum linearity of excursion.
• AP 6.5 woofer with compact basket, protected by abrasion-resistant and scratch-proof coating, the motor affixed with damping epoxy adhesive. 
• AP 6.5 woofer with a high current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature-resistant plastic cover, protecting it against accidental short circuits.
• Developed with the KLIPPEL suite.

TECHNICAL SPECS
Woofer Size    165 mm
Tweeter Size    26 mm
Woofer Voice Coil Diameter    32 mm
Tweeter Voice Coil Diameter    10 mm
Magnet Size Woofer    85 x 40 x 15
Power Handling - Peak    300 W
Power Handling - Continuous    100 W
Impedance    4 Ohm
Frequency Response    60 ÷ 20k
Crossover Woofer    HP @ 3,5 kHz - 6 dB Oct
Adjustment Tweeter Level    +2; 0
Woofer Cone Diameter    129 mm
Xmax Woofer    2.5 mm

ELECTRIC-ACOUSTIC SPECS
Re Woofer    3.1 Ohm
Fs Woofer    80 Hz
Le Woofer mH @ 1 kHz    0.23
Vas Woofer    7.6 l
Mms Woofer    12 g
Cms Woofer    0.31
Bxl Woofer    4.7
Qts Woofer    0.7
Qms Woofer    4.7
Spl Woofer    93.5 dB